| Lifting height, m17 | Wheelbase, mm3800 | Height, mm3665 |
| Length, mm7610 | Width, mm2485 | Chassis modelElf |
| Weight, kg11700 |
ISUZU ELF Aerial Work Platform, 4x2, 17 Meters
Technical Specifications
| Parameter | Value |
|---|---|
| Exterior Aerial Platform Parameters | |
| Length | 7610 mm |
| Width | 2485 mm |
| Height | 3665 mm |
| Total Weight | 11,700 kg |
| Key Performance Parameters | |
| Rated Work Platform Load | 272 kg |
| Maximum Working Height / Bottom Height | 17.5 m / 15.52 m |
| Maximum Working Reach | 11.2 m |
| Working Reach at Maximum Height (out of Bucket) | 3.2 m |
| Working Height at Maximum Reach out of Bucket | 8.2 m |
| Outrigger: Lateral Span Front/Rear | 4270 mm |
| Longitudinal span left/right | 3350 mm |
| Work platform rotation angle | ±90° |
| Turntable rotation angle | 360° continuous rotation |
| Platform lift | Vertical lift by 500 mm |
| Applied voltage level | 35 kV |
| Upper insulation arm | 4.51 m |
| Effective length of lower insulation arm | 0.61 m |
| Wheeled | 3800 mm |
| Maximum driving speed | 89 km/h |
| Approach angle | 18.3° |
| Departure angle | 11.5° |
| Ground cable: cross-section | 25 mm² |
| Setup instructions | |
| Chassis | ISUZU |
| Engine | Weichai WP4.6NQ220E61 |
| Cab | Half row, 3 passengers allowed |
| Take-off power system | Transmission: power take-off system |
| Work platform | Two-seater, single bucket, insulated inner and outer buckets |
| Platform dimensions | 1.19 m × 0.6 m × 1.06 m |
| Boom (boom) type | Hybrid arm (folding + telescopic), frame - high-strength steel and fiberglass (insulation material) |
| Rotating | The upper body rotates hydraulically 360°, the bucket rotates 180° |
| Outriggers | H-type |
| Working system | The upper and lower systems are controlled by hydraulic handles |
| Upper control | Equipped with 3D hydraulic lever; boom swing, pitch, and telescope can be controlled simultaneously |
| Hydraulic system | Stepless speed regulation; cylinders are equipped with balancing valves or hydraulic locks. |
| Leveling system | Volumetric cylinder with automatic leveling, manual control and bucket water discharge function |
| Device safety | Roll-over protection system, safety valve, entry/exit lock, emergency pump, vehicle level sensor, emergency brake for bucket |
| Body grounding device | 25 mm² stranded copper wire with grounding solder |
| Insulated small boom | Rotates, extends, tilts; lifting weight up to 454 kg |
| Hydraulic tool interface | Open quick-release connector on the work bucket for powering hydraulic tools |
| Lifting height, m | 17 |
|---|---|
| Wheelbase, mm | 3800 |
| Height, mm | 3665 |
| Length, mm | 7610 |
| Width, mm | 2485 |
| Chassis model | Elf |
| Weight, kg | 11700 |
-
No questions yet
Advantages of Working with VELES
Turnkey Business Solutions
FULL TRANSACTION SUPPORT
Our specialists will help you with equipment selection, document processing, and customs clearance. You receive a ready-made turnkey solution. We provide an official warranty on all Isuzu equipment. You can also use our services for maintenance and repair.
COMPETITIVE PRICES AND FAST DELIVERY
Thanks to direct shipments from China, we offer Isuzu specialized equipment at competitive prices. You get high quality without overpaying. We organize fast and safe equipment delivery. Our logistics specialists will calculate the optimal route so you receive your order in the shortest possible time.